TES-45 CAT-5 Lan Cable Tester
|
|
|
- Test a wide range of UTP cables such as 10Base T , 100Base Tx , 10Base 2 (Coax), 356A , TIA-568A , TIA-568B, etc.
- Can tests for wiring faults such as open, short , reversed , crossed and split wires.
- Can identify up to 4 different cables at one end by provided remote identifiers.
- Double digital 14-segment LED and 4 pair LEDs clearly display the fault status.
- Provided over voltage (max.56V) protection to prevent damage frommiss connecting to live circuit of networking.
- Simple and effective use.
- Auto power off
|
|
|
| Display/LEDs |
Double digital 14-segment LED
Four FAIL (red) LEDs
Four Pass (green) LEDs |
| Connector |
RJ45, BNC |
| Cable pairs tested |
1/2 , 3/6 , 4/5 , 7/8 |
| Faults status |
Open , Short , Reversed , Crossed , Split and Low Battery |
| Test cable length |
Minimum : 1.2M (4ft) ,
Maximum : 150M (492ft) |
| Power |
9Volt battery |
| Size |
170 x 52 x 38mm |
| Weight |
Approx. 180g |
| Environment Conditions |
Operating : 0 ℃ to +50 ℃
Storage : -20 ℃ to +60 ℃ |
| Accessories |
Instruction manual, One patch cable (RJ-45 to RJ-45,30cm long) &
One remote identifier #1(Optional for A #2, #3 & #4 )
(Optional for B #5, #6, #7 & #8) |
|
|
|
|
|
|
|
ISO9001:2000 Copyright
